| Model | RG-AP630(IODA) |
| Target Deployments | For big campus, wireless city, harbour, storage room, mine |
Basic Specifications | Radio | Concurrent dual-radio dual-band |
| Protocol | 802.11a/b/g/n/ac |
Operating Bands | 802.11b/g/n: 2.4GHz to 2.483GHz |
| 802.11a/n/ac: 5.150GHz to 5.350GHz, 5.47GHz to 5.725GHz, 5.725GHz to 5.850GHz |
| (vary depending on countries) |
| Antenna | Built-in Omnidirectional Smart Antenna (support external/internal antenna switching) |
| Antenna Gain | 4dBi |
Max Throughput | 450Mbps@2.4GHz |
| 1.3Gbps@5GHz |
| 1.75Gbps per AP |
| Spatial Streams | 3 |
Modulation | OFDM: BPSK@6/9Mbps |
| QPSK@12/18Mbps |
| 16-QAM@24Mbps |
| 64-QAM@48/54Mbps |
| DSSS: DBPSK@1Mbps |
| DQPSK@2Mbps |
| CCK@5.5/11Mbps |
| MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM and 256QAM |
Receiver Sensitivity | 11b: -99dBm(1Mbps), -93dBm(5.5Mbps), -90dBm(11Mbps) |
| 11a/g:-93dBm(6Mbps), -85dBm(24Mbps), -82dBm(36Mbps), - 77dBm(54Mbps) |
| 11n:-92dBm@MCS0, -73dBm@MCS7, -92dBm@MCS8, -73dBm@MCS15 |
| 11ac HT20: -90dBm (MCS0) , -63dBm (MCS9) |
| 11ac HT40: -85dBm(MCS0) , -60dBm (MCS9) |
| 11ac HT80: -82dBm(MCS0) , -58dBm (MCS9) |
| Maximum Transmit Power | 27dBm Note: The transmit power is configurable to up to 15dBm in 1dBm steps. The actual transmit power depends on local laws and regulations. |
| Adjustable Power | 1dBm |
| IP Rating | IP67 |
Ports | Service Port | 1 10/100/1000Mbps ETH1/PoE IN port (RJ-45 connector); |
| 1 SFP port (combo with ETH1) |
| Management Port | 1 Console Port(RJ45 or Bluetooth) |
Power | Power Supply | PoE+ (802.3at) |
| Power Consumption | <25W |
WLAN | Maximum clients per AP | Up to 256 |
SSID capacity | Up to 16 per radio |
| Up to 32 per AP |
| SSID hiding | Support |
| Configuring the authentication mode. Encryption mechanism and VLAN attributes for each SSID | Support |
| Remote Intelligent Perception Technology (RIPT) | Support |
| X-speed | Support |
| Intelligent load balancing based on the number of users or traffic | Support |
| STA control | SSID/radio-based |
| Bandwidth control | STA/SSID/AP-based speed control |
| Preference for 5GHz (band select) | Support |
| Wireless position tracking | Support |
| Dynamic Frequency Selection(DFS) | Future Release Support |
Security | PSK, Web, and 802.1x authentication | Support |
| Data encryption | WPA (TKIP) , WPA2 (AES), WPA-PSK, and WEP (64 or 128 bits) |
| QR code authentication | Support |
| SMS authentication | Support |
| PEAP authentication | Support |
| Data frame filtering | Whitelist, static/dynamic blacklist |
| User isolation | Support |
| Rogue AP detection and countermeasure | Support |
| Dynamic ACL assignment | Support |
| WAPI | Support |
| RADIUS | Support |
| CPU Protection Policy (CPP) | Support |
| Network Foundation Protection Policy (NFPP) | Support |
| Wireless Intrusion Detection System(WIDS) | Support |
| Wireless Intrusion Prevention System (WIPS) | Support |
Routing | IPv4 address | Static IP address or DHCP reservation |
| IPv6 CAPWAP tunnel | Support |
| ICMPv6 | Support |
| IPv6 address | Manual or automatic configuration |
| Multicast | Multicast to unicast conversion |
Management and Maintenance | Network management | SNMP v1/v2C/v3, Telnet, SSH, TFTP, and FTP and web management |
| Visualized wireless heat map analysis | Support (need to integrate with SNC) |
| Real-time spectrum analysis | Support (need to integrate with SNC) |
| Fault detection and alarm | Support |
| Cloud AC management | Support |
| Statistics and logs | Support |
FAT/FIT switching | The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
| The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
External Characteristics | Lock | Support |
| LED Indicators | Power status and WDS signal strength |
Relevant Standard | Wi-Fi Alliance Certification | Support |
| Safety Standard | GB4943, UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22 |
| EMC Standard | GB9254-2008, EN301 489, EN55022, FCC Part15 |
| Health Standard | FCC Bulletin OET-65C ,EN 50385, IC Safety Code 6 |
| Radio Standard | FCC Part15,EN300328, EN301893 |
| Vibration Standard | GB/T 2423 |
| Dimensions (W x D x H) (mm) | 276 × 246 × 90 |
| Specifications | Weight | <2.5kg |
Work Environment | Temperature | Operating Temperature: -40°C to 55°C |
| Storage Temperature: -40°C to 70°C |
Humidity | Operating Humidity: 5% to 95% (non-condensing) |
| Storage Humidity: 5% to 95% (non-condensing) |
| Installation Mode | Wall/pole-mount installation |
